WAP880-0 WiFi6 802.11ax 3600Mbps Outdoor External Antennas

  • 11ax 4×4 Outdoor Wireless Access Point with IPQ8072 industrial CPU
  • 1*10/100/1000/2500Mbps RJ45 ports, support PoE power supply
  • Support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming
  • Work with AP controller and cloud management


WAP880-O is an 11ax Wi-Fi standard Qualcomm Chipset high power industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming.

It comply with 802.11ax, 4*4 MIMO technology, dual band, up to 3657Mbps data rate; equipped with 2.5G WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation, faster Ethernet data rate and more users, then multiple users can upload or download multiple packets at same time, narrower subcarrier spacing and longer symbol time, improved the stability and data processing efficiency, publicly to be used in high density access environment,with IP67 proof ,it supports both external Omni Antenna and Sector Antenna which can be used in many different environments.


Main Features:

  • Qualcomm 6-core enterprise CPU with more stable performance.
  • 2.5G Ethernet port. Using 2.5Gbps Ethernet port, compared with Gigabit port, the speed is greatly improved, so that the wired interface is no longer the bottleneck of wireless transmission,.
  • Wireless data rate up to 3.6Gbps. 802.11ax support 1024QAM, long OFDM symbol, 160M bandwidth and 11ax 4×4 MIMO technology, the wireless data rate up to 3.6Gbps, meet with demand of high-speed applications such as VR/ AR, 4K or 8K stream media.
  • 1024-QAM Modulation Mode. 802.11ax adopt 1024-QAM modulation, which is more efficient than 802.11ac modulation, the throughput of single spatial traffic is increased by 25%.
  • DL/ UL MU-MIMO 802.11ax support both downlink MU-MIMO and uplink MU-MIMO. It can communicate with multiple end users at the same time, greatly improving the user’s uplink transmission rate and the system’s uplink and downlink capacity, improving the efficiency of multi-user concurrent scenarios, reducing the terminal application latency.
  • TWT (Target Wake-up Time). 802.11ax support TWT, allowing devices to negotiate when need to wake up, send and receive data. In additional, wireless AP can group the device into different TWT cycles, increase sleep time, reduce the device competing after wake-up, and save the device power.
  • Coverage Improvement. 802.11ax support long OFDM symbol transmission mechanism and 2MHz narrowband transmission, effectively reduced the packet loss rate and noise interference, improve the receive sensitivity and increase the WiFi coverage.
  • Improvement of Anti-Interference Ability. 802.11ax support BSS color bit and dynamic CCA-SD (Clear Channel Assessment Signal Detection) threshold and power adjustment, effectively alleviates the channel interference in multi-users scenarios, improve the utilization of spectrum resources.


Hardware Spec:
ChipsetIPQ8072A +QCN5054+QCN5024+QCA8081*2
DDR512MB (16 bit) *2=1GB, max up to 2GB
2.4G Frequency2.4GHz - 2.484GHz
2.4G Wi-Fi standard802.11b/g/n/ax
5.8G Frequency5150~5850MHz
5.8G Wi-Fi Standard802.11 a/n/ac/ax
Interface1 * 10/100 /1000/2500Mbps RJ45 WAN Port
1 * 10/100 / 1000/2500Mbps RJ45 LAN Port
1 * Reset
1* Bluetooth(optional)
1 * DC Port
AntennaIPEX Connector, 4*4dBi dual band omni antennas
Data Rate3657Mbps ( 2.4G: 1182Mbps (11ax 4x4); 5.8G: 2475Mbps (11ax 4x4))
End Users300+
RF Power2.4G ≤ 20dBm 5.8G ≤ 19dBm
PoE48V (IEEE 802.3at+)
LED lightSys; 5.8G wifi; 2.4G wifi; WAN; LAN
Max Power Consumption≤ 22W
Size198mm * 198mm * 41. mm
Working Temperature-20°C to 45°C
Storage Temperature0°C to 70°C
Humidity5%~95% (non-condensing)
Working ModeGateway, AP
Wireless FunctionsMultiple SSID functions: 2.4GHz: 4; 5.8GHz: 4.
Support SSID hidden
Support seamless roaming, 802.11kvr standard.
Support 5G Prior for a faster Ethernet.
Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x
Support MAC filter
Support Wi-Fi time on/off to save energy
Support client isolation to improve the wireless stability
Support RF power adjustable, adjust the RF power based on environment.
Support user quantity limited, Max 64 users to access each band.
Networking FunctionVLAN settings
Cloud access support in gateway mode
Device ManagementBack-up the configuration
Restore the configuration
Reset to factory default
Reboot the device: including time reboot or reboot immediately
Admin management password modify
Firmware upgrade
System log
Support firmware GUI web management, AC controller management, remote management and cloud management

Additional information

Weight5 lbs
Dimensions12 × 12 × 10 in
Installation manual


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.